Class-D amplifier providing 100 watts/channel (RMS) into 8 ohm loads or 125 watts/channel into 4-ohm loadsBridgeable output provides 225 watts into a single 8-ohm load4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire12-volt trigger input for power-on/off12-volt trigger output for controlling other devicesBuffered loop output of original signal for connecting additional amplifiersRear panel volume gain adjustmentBuilt-in thermal and short circuit protection circuitsIncludes rack-mount ears for mounting a single unit, or two units side-by-side—Audio Inputs: Stereo Analog RCAAudio Outputs: Buffered stereo analog RCA loop outputOutput Power: 100 watts per channel into 8 ohms (0.1% THD N), or 125 watts per channel into 4 ohms (0.5% THD N), or 225 watts into a single 8 ohm load (0.2% THD N)Minimum Output Impedance: 4 ohms in stereo mode, 8 ohms in mono bridged modeTrigger Input: 12 VDC, 10 kΩTrigger Output: 12VCD, 100mAInput Power: 100 – 240 VAC, 50/60Hz, 2.5AStandby Power Consumption: ≤ 0.5 wattsDimensions: 8.5” x 10.5” x 1.8” (216 x 267 x 45 mm)—
